VRM02 | VRM 02

Back to overview

PRODUCT DESCRIPTION

The VRM 01 and VRM 02 are axial seals consisting of 2 sections, one coated metal ring and one mould vulcanised elastomer sealing element. The metal ring protects the elastomer seal against damage, serves as a stand and support for the elastomer seal and simultaneously acts as a flinger. The elastomer seal is not firmly bonded to but stretched over the metal ring and is additionally held by the axial flange. With the VRM 02 the metal ring is extended in an axial direction on the outer sheath. Additional labyrinth sealing is created in combination with the circulating groove in the sliding surface. The VRM axial seal fits tightly on the shaft (press fit) and must be installed at a precisely defined distance from the metal sliding surface to guarantee the defined axial prestress of the elastomer sealing element. In rotation, the sealing lip rubs axially against the metal sliding surface at the contact pressure resulting from the selected prestress. The required sealing function is thus achieved. The total axial contact pressure results from the prestress in the installation housing, the geometry of the sealing lip as well as the elasticity and tensile properties of the elastomer. The VRM axial seal creates a centrifugal effect which contributes to the good sealing function. Dust, dirt and water spray from the outside are, for the most part, flung away. With increasing peripheral speeds, the centrifugal force pushes the elastomer sealing element outwards which decreases the contact pressure. Above a certain peripheral speed, the sealing lip lifts up from the metal sliding surface completely. The VRM axial seal then operates only as a gap ring and flinger. The VRM 02 additionally functions as a labyrinth seal. To achieve this, the sliding surface must be provided with a groove in which the extended metal ring can run. The VRM 02 provides additional protection due to the labyrinth in the housing groove and is used for applications with very high demands.

PRODUCT ADVANTAGES

- simple sealing element with narrow installation width - sealing against grease, dirt, dust and water spray - additional sealing function due to the centrifugal action of the metal ring - good in combination with rotary shaft seals - low demands on the sliding surface with regard to the surface quality - simple installation - the metal ring protects the elastomer sealing element against damage - the friction decreases with increasing peripheral speed as a result of centrifugal force - good dynamic sealing action - no additional axial stop required

Select your filter

polymer
brand
Dichtomatik
design
VRM02

Filtered items ( 30 hits )

design material d1 d2 brand item no. SP | IP  
VRM02 70 NBR NB703411 32 6 Dichtomatik 67174169 Details
VRM02 70 NBR NB703411 34 6 Dichtomatik 67174170 Details
VRM02 70 NBR NB703411 37 6 Dichtomatik 67174171 Details
VRM02 70 FKM FP703403 37 6 Dichtomatik 67174231 Details
VRM02 70 NBR NB703411 42 6 Dichtomatik 67174172 Details
VRM02 70 FKM FP703403 42 6 Dichtomatik 67174232 Details
VRM02 70 NBR NB703411 48 6.5 Dichtomatik 67174080 Details
VRM02 70 FKM FP703403 48 6.5 Dichtomatik 67174233 Details
VRM02 70 NBR NB703411 53 6.5 Dichtomatik 67174173 Details
VRM02 70 FKM FP703403 53 6.5 Dichtomatik 67174234 Details
VRM02 70 NBR NB703411 58 6.5 Dichtomatik 67174174 Details
VRM02 70 FKM FP703403 58 6.5 Dichtomatik 67174235 Details
VRM02 70 FKM FP703403 63 6.5 Dichtomatik 67174083 Details
VRM02 70 NBR NB703411 63 6.5 Dichtomatik 67174175 Details
VRM02 70 NBR NB703411 72 7.5 Dichtomatik 67174176 Details
VRM02 70 NBR NB703411 77 7.5 Dichtomatik 67174177 Details
VRM02 70 FKM FP703403 82 7.5 Dichtomatik 67174079 Details
VRM02 70 NBR NB703411 82 7.5 Dichtomatik 67174178 Details
VRM02 70 NBR NB703411 87 7.5 Dichtomatik 67174179 Details
VRM02 70 NBR NB703411 92 7.5 Dichtomatik 67174180 Details