Pneuko M310 | MERKEL COMPLETE PISTON PNEUKO M 310

Back to overview Piston Seal (Pneumatic)
Cross section sketch Piston Seal (Pneumatic) Installation sketch Piston Seal (Pneumatic) Product Data Sheet

PRODUCT DESCRIPTION

The compact, short, Merkel complete pneumatic piston Pneuko M consists of an aluminium body, guide strip, a magnet and the sealing body with a special sealing edge on the sealing lip and integrated buffers made of very wear resistant polyurethane.

PRODUCT ADVANTAGES

  • Long service life
  • Low start friction due to optimised sealing lip geometry and additional venting passages
  • Constant good sealing behaviour over a wide pressure range (to 1,2 MPa)
  • Running properties without tendency to tilt due to a guide strip optimised for the application
  • Aluminium body brings weight saving and permits high energy absorption
  • Easily fastened to the piston rod
  • Integrated static seal
  • Supplied suitable for storage and fitting in deep-drawn inserts
  • Simple provisioning
  • Integrated magnet for a position check using a sensor

Select your filter

polymer
AU
material
85 AU 21030
brand
Freudenberg
design
PK M310

Filtered items for Pneuko M310 ( 6 hits )

Page 1 / 1 previous items next items
design material DN dN H1 d5 d6 H2 H brand item no. SP | IP    
PK M310 85 AU 21030 32 8.1 10.6 17 20 5.2 14 Freudenberg 525994 Details
PK M310 85 AU 21030 40 8.1 11.6 21.4 25.4 5.7 15 Freudenberg 49360808 Details
PK M310 85 AU 21030 50 10.1 12.1 27.3 32.8 5 15.5 Freudenberg 49392696 Details
PK M310 85 AU 21030 63 10.1 15.79 28 33 4.9 19 Freudenberg 49392699 Details
PK M310 85 AU 21030 80 12.1 17.5 29 34.4 8.5 21.5 Freudenberg 526210 Details
PK M310 85 AU 21030 100 17.1 20 39.6 46.8 8.85 25.5 Freudenberg 526499 Details